THE BEAUTY OF SOUND
Circle Labs products are the outcome of 25 years of research, careful design and passion in perfect amplification of sound. This came from the need for sound which could bring the full expirience of music to the listener without losing any of its charm, harmony or elegance.
For years Circle Labs has been producing and designing specialised devices dedicated to research in microbiology. Our equipment can be found in many vanguard scientific facilites in Poland and around the world. However, the constructor and owner of the company Krzysztof Wilczyński, always had a keen interest in audio devices.
In 2019 original Circle Power technology drew the attention of top polish producers of hi-end audio equipment, which resulted in the birth of reference monoblocks.
That was the spark which ignited a fire of dynamic development for the company and the bringing of our products to a wider audience.
Hybrid integrated Amplifier.
The Current flagship Circle Labs integrated amplifier.Its design
uses all original Circle Labs Solutions.
This amplifier uses proprietary solutions from Circle Labs.
The minimalist preamplifier based on the Siemens nos tube is combined with a solid-state power amplifier in Circle Power technology.
Final stage ensures appropriate dynamics and good drive for most of the loudspeakers available on the market.
The amplifier is equipped with a remote control.
The A200 is a hybrid integrated amplifier that offers power output of 120W/8Ω, 200W/4Ω and is equipped with a balanced XLR input, four pairs of RCA inputs and a direct power amplifier input that bypasses the preamplifier.
Volume regulation is implemented via a resistor ladder sourced from the prestigious company Khozomo. Resistors with a tolerance of 0.1% are switched using state of the art relays which guarantees the highest possible precision and long term durability traditional potentiometers can't match.
The A200's preamplifer is designed around a NOS Siemens vacuum tube with stable polarisation; this minimalist solution allows for the lowest possible number of passive components: one vacuum tube, a resistor, and a state of the art capacitor made of solid copper foil. The extremely short signal path directly influences the neutrality of sound and dynamism of transmission.
The A200's "Circle Power" topology is an original development of Circle Labs and we believe is the best combination of tube and transistor devices. This design uses a single-ended input stage with current steering of a BJT output stage and combines the detail and precision of single-ended systems with the efficiency and dynamics of balanced systems. The A200's power amplifier is a true dual-mono design with separate toroidal transformers and power supplies with a combined capacitance of 200,000µF
Launch LIST Price. $14,000 Inc GST
Output power stereo mode:
Output power monoblock mode:
A stereo power amplifier with the possibility of working as well as a monoblock in a fully balanced mode.
NOS Siemens triodes coupled via Supreme Silver / Gold / Oil capacitors are responsible for the voltage amplification.
The power stages use the proprietary Circle Power system made for high power and high current applications.
Circle Labs M200
The M200 is a true dual-mono stereophonic power amplifier that can optionally become a fully balanced monoblock.
NOS Seimens triodes from the 1960s were used in the design of the amplification path and individual pieces are selected with utmost care.
Input stage uniquely gains stable polarity from a battery source, which allows it to use only one vacuum tube, one resistor, and one premium quality Mundorf silver-gold signal capacitor; this solution provides a very short signal path with the best possible parameters.
Circle Power current steps are closest to the topology of single-ended amplifiers, while retaining maximum efficiency and power. Detail and timbre, characteristic of single-ended amplifiers, is joined by high efficiency amplifier bass control.
Highest spec Sanken current-coupled bipolar transistors in the current amplifcation stage allow the M200 to have even more detailed, dynamic speaker control and an ultra wide frequency response. Separate toroidal transformers are included for all channels and built to our unique specification using the highest quality materials.
A separate copper-insulated EI core transformer and completely separate power supply paths are used for both channels in the vacuum tube stage. The power amplifier stage uses high current capacitors with a combined capacitance of 200,000 µF. WBT Nextgen terminals provide signal to connected loudspeakers.
Launch LIST Price. $14,500 Inc GST
Preamplifier is a fully balanced design from input to output.
The idea behind the construction of the P300 was to build a preamplifier as neutral to the signal as possible. With the shortest possible signal path. Internal cabling length is minimal.
The preamplifier was designed around the newest JFET and BJT transistor types and uses a proprietary Circle Amp topology.
Volume is controlled by a resistor ladder and a remote is supplied.
The P300 preamplifier is a fully balanced design.
he creation of the P300 was inspired by the idea of a preamplifier that is truly neutral with the shortest possible signal path. Inner cabling was strictly limited. It was designed around the newest JFET and BJT transistor types and uses a proprietary Circle Amp topology.
Volume is controlled by a relay operated resistor ladder and offers 63 step resolution. An aluminum remote is supplied. We designed a specially built, low noise power supply based on two independent channel transformers with LL cores and Elma SILMIC II capacitors. The power supply has two cascading steps of stabilisation. The stabilisers use an LED matrix as a source of reference current, characterised by remarkably lower noise than traditional merged Zener diodes.
Launch LIST Price. $7,500 Inc GST